Mainly used in pharmaceutical, chemical, food and other industries of material crushing. Working principle: Almighty water-cooling (active hammer crusher) grinder using small hammer high speed rotation and by centrifugal force flailing form, is crushed by hammer and edge gear mutual impact and friction effect is crushed. The machine has simple structure, stable operation, good crushing effect, and can be directly discharged through the grinding chamber of the host machine, and the particle size is obtained by replacing the screen with different aperture, and the machine is full of stainless steel. The inner wall of the casing is smooth, and the surface roughness of the previous model is changed, and the phenomenon of powder accumulation is changed, and the production of medicine, food and chemical industry is more in line with the national standard, and the requirement of GMP is achieved. This machine is equipped with screen, the screen can be replaced according to the customer request, when the material is crushed to less sieve pore diameter, powder from out of the screen, fall into the aggregate below the barrel, the dust flying in the barrel is by dusting motor is sucked into the dust removing box bag in filtering, air by the fan is discharged to the outdoors. The water cooling device of the universal grinder is introduced: all the machine can be equipped with water cooling device according to the special requirements of users and the special physical and chemical properties of the crushed materials. If be crushed material of low melting point, low ignition temperature and heat easily soft, sticky, resulting in decreasing grinding effect or cannot shatter and even cause combustion and explosion, it is necessary to the crushing equipment equipped with water cooling device. Commonly used water cooling device is in the crushing cavity of the anterior and posterior wall were added a water sealing clamp, the flow of water or wells will continue to flow into the posterior wall of water pinch, then flows into the anterior wall of water pinch, again by the anterior wall of water clip back into the wall and the wall of the water outlet of the outflow. The purpose of the water cooling device is to reduce the temperature of the grinding chamber!

Tips: 1 different seasons, different temperatures, different temperatures will produce different cooling effect.

2 the heat produced by crushing different materials is different, and the temperature is also different.

3 flow into the water cooler, the lower the water temperature, cooling (heat) effect is better. 4 different materials, the melting point of light is different, the user must have full understanding and grasp of the crushed material.

5 water cooling devices need to book the installation, the other can be based on customer demand increased nitrogen device. Machine features: 1 simple structure, crushing cavity, easy disassembly, easy to clean. 2 smooth running, low noise, small vibration. 3 simple operation. You can control the size of the screen. Note: 1 this machine at work to ensure that there is someone to look after. 2. Crushed material particles should not be too large, such as the case of boring machine (i.e., machine due to the load is too large to cause the speed is significantly slow down or stop running passively), should immediately cut off the power. 3 if the particle is too large to be crushed, it should be broken through the Almighty crusher, then the machine.