All stainless steel manufacturing, 304 material, in compliance with GMP requirements

Stainless steel dust removal and crushing machine use:

Mainly used in pharmaceutical, chemical, food and other industries of material crushing. Contraindicated in crushing inflammable and explosive items, not suitable for grinding high oil content (such as sesame seed, walnut, melon seeds, rapeseed and other), viscous material, because of the high oil content and viscous material is easily blocked screen.

Two. Working principle:

The machine makes use of the relative motion between the movable tooth disc and the fixed gear plate, and the interaction between the material and the material to obtain the crushing and grinding of the material in the crushing cavity. This machine is equipped with screen, the screen can be replaced according to the customer request, when the material is crushed to less sieve pore diameter, powder from out of the screen, fall into the aggregate below the barrel, the dust flying in the barrel is by dusting motor is sucked into the dust removing box bag in filtering, air by the fan is discharged to the outdoors.

Three. Machine features:

1 the structure is simple, the crushing cavity is simple and easy to clean.

2 smooth running, low noise, small vibration.

3 simple operation. You can control the size of the screen.

Four. Matters needing attention:

1 the machine in the external power supply should be installed according to the power of the machine power circuit breaker, the purpose is too large in the machine load, too large current automatically cut off the power supply, to protect the motor!

2 this machine in the work to ensure that there is someone to look after.

3. The crushed material particles should not be too large, such as the case of boring machine (i.e., machine due to the load is too large to cause the speed is significantly slow down or stop running passively), should immediately cut off the power.

3 if the particle is too large to be crushed, it should be broken through the Almighty crusher, then the machine.